6 Safety Tips In Driving At Night

6 Safety Tips In Driving At Night

The dynamics in daylight driving are quite different when you are driving at night. Things get a lot of riskier when there’s weak or no illumination. Drivers and commuters alike have to heighten their caution in treading the dark roads.

Of course, these things are not exaggerations. According to the National Highway Traffic Safety Administration (NHTSA), most life-threatening vehicular accidents are likely to happen during the night. 

Evidently, the reason for this is quite simple. Our eyes are not wired to see the dark. Even if the headlights of your vehicle are fully cranked, they cannot still illuminate the roads fully. Alex Epstein of the National Safety Council said: “You see less of the road ahead of you and have less room and time to stop.”

If you are driving at night, make sure that the following precautions will be taken into account. 

Don’t Drive Drunk

Driving and drinking are two factors that don’t mix up to well. In an equation, these two variables should never mix up. According to NHTSA, many fatal vehicular mishaps are caused by drunk driving. 

Alcohol can impair your senses. And they can do much worse during the night. Driving requires the coordination of all the senses of your body. When they are disoriented, the task of maneuvering your vehicle gets deleterious. 

Needless to say, you need to avoid alcohol if you are going to drive. If you have taken large volumes of alcohol already, don’t get behind the wheels anymore. That would save your life.

Don’t Drive While Weary

If your body and mind are exhausted, it is highly recommended that you avoid driving. In the reports of the NHTSA, it was found out that drowsy-driving usually occurs during midnight up to dawn. 

If you are going to drive within these hours, you might find yourself sleepy. Or, if not, you will eventually encounter other drivers who are feeling lethargic and dozy. In the latter case, you should be the better driver. Make sure that you hit your caffeine before driving. If you can’t fight the sleepiness, find a safe area to rest. 

You can also do other things that can help you stay awake. Pumping the radio or bringing a company can keep the drowsiness at bay. 

Always Have A Clear View

You don’t drive if you don’t have a clear view. That’s an unwritten rule that should be followed, especially during the night. 

Damaged or dirty windshields can effectively affect your driving visibility. They tend to scatter light, which in turn, can maximize the instances of glaring. Believe it or not, excessive glaring can disrupt drivers. They can cause accidents, too. 

On the flip side, damaged and dirty headlights can also reduce the visibility of the road. That isn’t very good for you. Furthermore, broken headlights can affect other drivers, too, as they can cast glares. Therefore, before you drive at night, make sure that your windshields and headlights are in proper condition.

Don’t Drive On Two-Lane Highways

According to the recommendations of the NHTSA, these two-lane highways are quite risky. Nightime glares are excessive on these paths. Furthermore, it is notable that two-lane roads contain a lot of sharp curves. They are hilly, too. Compared to freeways, two-lane highways offer a high degree of difficulty for drivers, especially during the night. 

Don’t Speed Up

Since it is the nighttime already, you need to drive with extra caution. You cannot push yourself to drive recklessly, given the fact that visibility is quite poor already. Never drive beyond the speed limit. Otherwise, you will be put into a bad spot. 

Many road crashes out there are due to speeding. If they are already prevalent during day time, how much more on the night? NHTSA recorded thirty-seven percent of nighttime road fatalities are caused by overspeeding. Aside from the low visibility setting, the night causes us to lower our reaction time. 

Position Your Headlights Properly

When driving at night, the headlights of your vehicle are your light source. Therefore, you should make sure that they have been angled correctly to ensure optimal visibility on your part. If the beam of the headlights is tilted wrongly, you will lose some of that brightness. Moreover, there is a good chance that you can blind oncoming drivers if your headlights are tilted upwards.