Efficient driving means that you have total control over your fuel economy. You see, if you are concerned about the fluctuating gas prices, it is essential that you become good at handling your vehicle’s operation. When you drive, you have to make sure that you can mitigate your fuel consumption.
Here are some ways on how you can do it.
Control Your Acceleration
One of the things that you need to do so that you can easily mesh into traffic is to limit your acceleration. When you drive too fast, you feel invincible and cool. However, be wary because it eats your fuel excessively.
Keep in mind that fuel consumption is directly related to the engine. When it is working too hard, it will drain more fuel. If you accelerate all the time, not only you are risking yourself, but you’ll also visit the gas station from time to time.
Even the act of pushing the accelerator while passing or switching lanes can degrade your fuel economy. Moreover, speeding up then suddenly hitting the brakes can waste your gas significantly. A sign of a good driver reflects on how smoothly he or she controls her vehicle.
Improve Vehicle’s Traction
Whenever your vehicle loses its traction, your driving efficiency goes down, too. Even if you are not racing, there are still situations where your tires slip on the road. A good example of this is when you are driving on a rainy or snowy road. Whenever the terrain is slippery, it is difficult to maintain the traction of your vehicle. And that’s not good, both for your safety and the fuel. If you can’t invest in good tires, make sure that you slow down whenever you are dealing with slippery and rough paths.
Take Into Account The RPM And MPG
The workload of an engine is directly determined by the speed of the turn of the crankshaft. The crankshaft is the one that transmits the engine power to the transmission and then directed to the wheels. Keep in mind that the crankshaft speed is often expressed in revolutions per minute (RPM), which you can see on the tachometer.
Always take into account that a manual transmission equips the driver with full control over the speed of the crankshaft. The reason for this is pretty simple. Manual transmission vehicles are capable of speeding or slowing the engine via their gear selection. When the gear is low, the RPM is high. The higher the RPM, the higher the torque the engine generates. Of course, it causes more fuel usage. On the other hand, automatic transmissions provide minimal control over this matter. However, this doesn’t mean that fuel efficiency can be expected.
If you have a manual gearbox, the upper gears shift quickly. Optimal shift points vary, depending on the gearing combination in the engine. But if you are aiming for optimal fuel economy, the ideal thing that you can do is to shift to second by about 15 mph. You can reach the top gear once you are already travelling 30 to 35 mph.
There’s a rule of the thumb that you need to follow here. When the engine is revving quicker than what is necessary to maintain an even speed, shift to the higher gear. You can also follow the same principle whenever down-shifting. If the gas pedal stays close to the ground to sustain the road speed, you might want to shift to the next lower gear. If you lug excessively in your gear, it will punish your engine and fuel mileage.
Utilize Upshift Light
If your vehicle is using a manual transmission, and it comes with an upshift indicator, take advantage of it. Specifically, you have to use the indicator as a guide for better driving. Specifically, this component incorporates the signals coming from the accelerator pedal, engine, and transmission. Using these signals, the device tells you the right moment to make an upshift. Following this guidance will ensure efficiency in the driving performance of your vehicle.
Look At The Tachometer
Tachometers are no longer exclusive to performance models. Even the standard units today allow their drivers to take a look at the engine speed and the road speed. Because of this, they can already see the most efficient RPM and drive to that point as closely as possible.
But what exactly is the most efficient RPM? Technically, it depends on the engine. However, this figure is always near to the speed that generates the highest torque. For fuel economy, it is generally essential that you maintain a speed below 3,000 PRM.